Celine Specifications

Celine is a waterproofing sealer that adds gloss and durability to both vertical and horizontal brick, slate, honed travertine, honed marble, stone, grout, masonry and flagstone. Celine is indoor and outdoor approved from showers to pool surrounds.

Celine Specifications & Characteristcs

Product Name

Celine Clear Sealer

Product Type

Porous hard surface sealer.

Product Description

Celine® Oil-Based Concrete Sealer is an exterior waterproofing sealer that adds gloss and durability to both vertical and horizontal brick, stone, masonry and mortar or epoxy set natural stone. It can also be used as a sealer on flagstone, brick or other cementitious materials.

Features & Benefits

• Seals and protects to extend the life of concrete, stone, masonry surfaces.
• A penetrating sealer that can be built to a high-gloss finish with multiple coats.
• Crystal clear, won’t yellow or discolor over time.
• Resists damage from water, UV rays, pool chemicals, most cleaning agents and heavy traffic.

Recommend & Uses

Celine Oil-Based Concrete Sealer is formulated for use on exterior concrete, brick, masonry, and stone surfaces. Use as a protective sealer on concrete driveways, walkways, patios, and pool decks or as a decorative glaze over brick and concrete block retaining walls, epoxy-set Chattahoochee stone, and flagstone.
More approved surfaces >

Safety Precautions and PPE: 

Safety should always be the number one priority. Before applying Celine you should always wear the correct PPE.

 Dwell Times and Reapplication:

50° 77° 110°
To Touch: 1hr 30min 10min
Time to Re-coat: 4hrs 1hr 30min
Shower/wet area Use Time Floor Walk On: 24hrs
Light Traffic: 12hrs 6hrs 2hrs
Heavy Traffic: 24hrs 10hrs 6hrs


Volume Solids:   17% ± 2%
Weight Solids:    23% ± 2%

Expected Duration Time:

Will vary depending on hardness and texture of surface, type of area, surface wear, frequency, and type of maintenance products used on the seal, Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or solvent-based cleaners will affect wear.

Showers : Shower floor: 3 years
Shower walls: 5-7 years
Residential floors : 10 years
Light Commercial Floors : 5 years

Cleaning Products that work with Imperia:

Imperia to deep clean >
Valore maintenance sealer >
Imperia maintenance sealer >

Applicable Temperatures:

Apply Celine between temperatures of 50° F ­ 90° F (10° C ­ 32° C).


4 oz covers 8-10 sq ft. when sealing stone, concrete and masonry.

Substrate sq ft/gal
Concrete floors 200-300
Porous concrete 150-250
Concrete block 100-150
Split-faced block* 75-125
Fluted block 50-100
Brick (clay) 200-300



1/8” 3/16” 1/4” 3/8” 1/2″
Tile Size (inches) (3mm) (4.5mm) (6mm) (9.5mm) (13mm)
1” x 1”x 1/4” 150 NA NA NA NA
3” x 3” x 1/4” 300 170 NA NA NA
4” x 4” x 1/4” 360 200 NA NA NA
6” x 6” x 1/4” 420 220 190 140 NA
8” x 8” x 1/4” 460 250 220 120 NA
12” x 12” x 3/8” 600 300 250 200 150
18” x 18” x 3/8” 900 600 500 300 NA

Coverage depends on applicator’s experience

Handling & Storage

Close container tightly after each use and store locked away in the original container only. Store between temperatures of 50° F ­ 90° F (10° C ­ 32° C).

Shelf Life

10 years

Cleaning of Equipment

Clean all tools and hands with Alco immediately after use. Read all specs in the SDS sheet.

General Surface Prep

Protect all surfaces. Perform a test area before using it across the floor.
Celine Directions >
Imperia Directions >

Approved Surfaces:

We have an entire page listed with the approved surfaces and how Celine is applied on each surface.
Approved Surfaces >


Water Repellency on Masonry and Natural Stone:

Method : SS-W-110C, weight gain, 24 hour Immersion
Result : 0.1% on Mortar Cube
: 0.0% on Concrete Brick
: 0.0% on Non-Sanded
: 0.0% on Sanded Grout
: 0.0% on Travertine Stone

Water Vapor Transmission:

Method : ASTM D1653 Method A
Result : 0.9 grains / sq ft / hour
: 13.9 grams/sq meter/24 hrs

Accelerated Weathering – QUV

Method : ASTM D4587, QUV-A, 5,000 hours
Result : Passes

Corrosion Weathering:

Method : ASTM D5894, 10 cycles, 3336 hours
Result : Rating 10 per ASTM D714 for blistering

Abrasion Resistant:

Method : ASTM D4060, CS17 wheel, 1000 cycles, 1 kg load
Result : 160 mg loss


Method : ASTM D522, 180° bend, 1/4″ mandrel
Result : Passes


Tukon: 12-1,000 cycles

Exterior Durability:

Method : 1 year at 45° South
Result :  Excellent

Flash Point:

ASTM D93, PMCC: 80°F

VOC: 643 g/L; 5.73 lbs/gal

Acid & Alkali Resistance Tests:

Each was allowed to react for 24 hours under a watch glass, washed
with water, allowed to recover for 30minutes then observed.


5% Tide ………….………….. No effect

2% Ivory flakes ……………… No effect


5% Citric Acid……………….. No effect

100% Milk……………………Very slight whitening

5% HCL ………….……….…. Very slight whitening

5% Phosphoric Acid ………….No effect

Mustard ………….…………. No effect

Ketchup …………………….. No effect

©2005-2024 pFOkUS® - All Rights Reserved


We're not around right now. But you can send us an email and we'll get back to you, asap.


Log in with your credentials

Forgot your details?